Transmitter Installation (Optional)
MH040FX
A2B/MH18VF1X/MH19VF1X
Accessories (Transmitter: MIM-B13)
Transmitter
Transmitter power
cable
Transmitter
communication cable
Installation Manual Case Cable-tie
7seg. LED
Display side
Transmitter
Terminal
side
Bolts spec.
M4
1
Fix the case at with bolts on the side of the control box in the outdoor unit.
(See the picture)
2
Attach the transmitter PCB to the case in the control box in the outdoor
unit, then connect the power and the communication cable between the
transmitter and the outdoor unit; refer to the figure of page 19.
3
If you install a transmitter to an outdoor unit, every indoor unit which is
connected to an outdoor unit can be controlled simultaneously.
4
Each outdoor unit connected to the same centralized controller has its
own transmitter.
Fix the case with hinges
(Control Box in the outdoor unit)
INSTALLING THE OUTDOOR UNIT
To Next Page
Loading...
