Samsung MIM-B19N - Setting the address using the DIP and rotary switches

Checking Operation
12
English
Installation
Setting the address using the DIP and rotary switches
࡙ Ɵ˵ʪɇʒʒθʪϑϑͱ˙ϩ˵ʪđͱʒɵЇϑϩʪθ˙ɇʀʪͱʒЇʪϑʒʪϩʪθʪʒɵцɇʒʒ˝ɇϩͱϩɇͱ˙ϩ˵ʪЭɇЇʪϑͱ˙ϩ˵ʪUÃťϑиϩʀ˵ʪϑϑʪϩϩͱĮĘ
and the value of the rotary switch.
kуɇΧʪ࣎ʒʒθʪϑϑߦߨߤߣߢߧߪƊǮߦࢄߢĮĘЭɇЇʪƊǮߦࢄߣĮĘЭɇЇʪƊǮߢ࣍θͱϩɇθцϑиϩʀ˵࣎ЭɇЇʪ
kуɇΧʪ࣎ʒʒθʪϑϑߢߥߨߢߣߩߢߧߤƊǮߥࢄߢĮĘЭɇЇʪƊǮߦࢄߣĮĘЭɇЇʪƊǮߢ࣍θͱϩɇθцϑиϩʀ˵࣎ЭɇЇʪ
࡙ The DIP and rotary switches are set only once when the power is turned on. If you have changed the DIP or rotary switch
settings, be sure to reset the power.
࡙ Ɵ˵ʪɇʒʒθʪϑϑθɇ˝ʪ˙ͱθϩ˵ʪđͱʒɵЇϑϩʪθ˙ɇʀʪͱʒЇʪϑ˙θͱߢϩͱߣߥߨࢋÃ˙ϩ˵ʪɇʒʒθʪϑϑϑͱЇϩͱ˙θɇ˝ʪࡡϩ˵ʪʪθθͱθkߧߤߥͱʀʀЇθϑࢋ
࡙ Set the DIP and rotary switches only once at boot time.
࡙ If you have changed the DIP or rotary switch settings, be sure to reset the power.
ƊǮߥ
ĮĘ
Į
ߢߢ
SW5 ƊǮߢ
ߣߣ
No Location Function ON OFF
ߢƊǮߥࣗߢ
Address
setting
ߢߣߩ 0
ߣƊǮߥࣗߣ ߧߥ 0
3 ƊǮߦࣗߢ ߤߣ 0
ߥƊǮߦࣗߣ ߢߧ 0
5 ƊǮߢ ߡߢߦ࣍࣎
Examples of address settings
SW4 SW5 SW1 Address (1 to 247)
ߢߣߢߣ 0~F
Expression Result
ߢߣߩ ߧߥ ߤߣ ߢߧ ߡߢߦ
0000 00 Ę
0000 ߢߢ ߢ
0000 ߣߣ ߣ
000ߢ 3 ߢߧߤ ߢߪ
00ߢ 0 ߥߤߣߥ 36
00ߢߢ 5 ߤߣߢߧߦ 53
0 ߢ 0 ߢ 3 ߧߥߢߧߤ 83
ߢߢ00 Eߢߣߩߧߥߢߥ ߣߡߧ
ߢߢ0 ߢ F ߢߣߩߧߥߢߧߢߦ ߣߣߤ
ߢߢߢߢ F ߢߣߩߧߥߤߣߢߧߢߦ Ę
ߢ 0 ߢߢ A ߢߣߩߤߣߢߧߢߡ ߢߩߧ
ߢߢߢ0Cߢߣߩߧߥߤߣߢߣ ߣߤߧ
ߢߢߢߢ 7 ߢߣߩߧߥߤߣߢߧߨ ߣߥߨ