Safety Information
4
English
Safety Information
FOR INSTALLATION
CAUTION
When connecting a wire, do not tighten it too much.
࡙ Failure to do so may result in breakage of the wire.
Make sure the Modbus interface module installation doesn't cause interference with other electrical appliances,
particularly in a hospital etc.
࡙ Failure to do so may result in abnormal operation.
Do not install the product in an area where combustible gas leaks or possible gas leakage is expected.
࡙ Failure to do so may result in breakage of the wire.
Do not install the product in conditions where it is exposed to oil, steam etc.
࡙ Use of the product in an area exposed to oil, steam, sulfuric acid gas etc may result in component damage or product
malfunction.
Do not install the product in a place where acid or alkali liquid or special sprays are used.
࡙ Failure to do so may result in electric shock or abnormal operation.
FOR OPERATION
WARNING
Do not remodel or repair the Modbus interface module yourself.
࡙ Failure to do so may result in product malfunction, electric shock and fire, so contact a service center for repair.
When disposing of an Modbus interface module, contact a service center.
Do not move or reinstall an installed Modbus interface module yourself.
࡙ Failure to do so may result in electric shock or fire.
FOR OPERATION
CAUTION
Make sure that water does not permeate inside the Modbus interface module.
࡙ Failure to do so may result in electric shock or fire.
Do not connect power cable to the control cable terminal.
࡙ Failure to do so may result in fire.
To Next Page
Loading...
