SETTING UP YOUR PRINTER
Installing Software from Diskette
7
If you have more than one disk, insert the next disk and
click Yes.
8
When copying to diskettes has been completed, click
Close in the Copy to Floppy dialog box. Then click Exit in
the SAMSUNG PRINTER SETUP dialog box.
To install the printer driver from the diskettes, follow this
procedure:
1
Insert the first diskette (if you have more than one
software diskette).
2
From the Start menu, select Run.
3
Type A:\setup.exe in the Open box and click OK. (if
your floppy drive is not A, substitute the correct letter.)
4
Follow the on-screen instructions to complete the
installation.
Installing Software
2.15
To Next Page
Loading...
