PRINT MEDIA
4.6
Loading Paper
44
Print the document.
33
When you print a document, you must
select Manual Feeder for Paper
Source from the software application,
and then select the correct paper size
and type. For details, see page 5.3.
55
If you are printing multiple pages, load
the next sheet after the first page prints
out.
66
Press Demo to start feeding.
Notes:
• The face-up output slot may not hold the printed pages properly.
• The printed pages will not stack in the face-down output tray unless you change output lever
position. After you finish using the face-up output slot, you must change the position of the
output lever to the normal position. Push it up.
22
Push the output lever down to open the
face-up output slot.
To Next Page
Loading...
