PRINTING TASKS
5.16
4
If you have created a new or edited an existing watermark,
the Add and Update button is enabled.
To add a new watermark to the list, click Add.
5
If you want to edit, select the desired watermark from the
list, edit, and then click Update.
6
When you complete the edit, click OK, and then start
printing.
To stop printing the watermark, select None in the Message
drop-down list.
1
When you change the print settings from your software
application, access the printer properties. See page 5.1 to
access the printer properties.
2
From the Watermark tab, select the watermark you want
to delete in the Message drop-down list.
3
Click Delete.
4
Click OK.
To delete a watermark
Printing Watermarks
To Next Page
Loading...
