Samsung ML-2150 - Page 206

U SING Y OUR P RINTER ON A N ETWORK
E.11
E
3 Press the scroll button ( or ) to display “Yes” on the
bottom line. Press the Enter button ( ).
4 Press the Upper Level button ( ).
5 Press the scroll button ( or ) until “Netware” displays
on bottom line. Press the Enter button ( ).
6 Press the Enter button ( ) when “On” displays.
7 press the Upper Level button ( ), then use the scroll
button ( ).
8 Press the Enter button ( ) when “Config Netware”
displays.
9 Press the scroll button ( or ) to display “Yes” on the
bottom line. Press the Enter button ( ), and then press
the Upper Level button ( ).
10 Press the Upper Level button ( ), then use the scroll
button ( ).
11 Press the Enter button ( ) when “IPX Frame Type”
displays.
12 Press the scroll button ( ) until you see the desired frame
type and press the Enter button ( ).
13 Press the scroll button ( or ) to change the setting and
then press the Enter button ( ).
14 Repeat steps 12 and 13 to configure another frame type, if
necessary.