Samsung ML-2150 - Installing Network or Serial Interface Card

P ROGRAMME I NSTALLING P RINTER O PTIONS
F.6
Removing the Memory or PS DIMM
1 Follow steps 1 and 2 on page F.3 to access the control
board.
2 Push the clips at each end of the connector slot away from
the DIMM.
3 Place the DIMM in its original packaging or wrap it with
paper and store it in a box.
4 Follow from Step 6 on page F.5.
Installing a Network or Serial
Interface Card
Check if there is missing parts in your package of the optional
interface card.
Network Interface Card,
SyncThru CD-ROM and
Setup Guide
Serial Interface Card