S
ETTING
U
P
Y
OUR
P
RINTER
2.11
2
Using a USB Cable
NOTE:
Connecting the printer to the USB port of the computer
requires a certified USB cable. You will need to buy a USB 2.0
compliant cable that is within 3 m in length.
1
Make sure that both the printer and the computer are
turned off.
2
Plug the USB printer cable into the connector on the back of
the printer.
3
Connect the other end of the cable to the USB port on your
computer.
See your computer User’s Guide, if you need help.
NOTES:
• For printing using the USB interface, you must be running
Windows 98/Me/2000/XP or Macintosh with the OS 8.6 and the
G3 processor or higher.
• If you want to print using the USB interface in Windows 98/Me,
you must install the USB driver to add the USB port. See
page 2.20.
To the USB port
on your computer
To Next Page
Loading...
