S
ETTING
U
P
Y
OUR
P
RINTER
2.21
2
4
Check CD-ROM drive and click Browse. Choose x:\USB
(where x is the drive letter for the CD-ROM drive) and click
Next.
5
Click Next. The USB driver will be installed.
6
When the installation is completed, click Finish.
7
When the language selection window appears, select the
appropriate language.
NOTE:
If you already installed the printer software, this window
doesn’t appear.
8
Follow the instructions on the window to complete the
printer software installation. For more details, see
page 2.17.
NOTES:
• If you want to use your printer with a parallel cable, remove the
USB cable and connect the parallel cable. Then reinstall the
printer driver.
• If your printer doesn’t work properly, reinstall the printer driver.
To Next Page
Loading...
