U
SING
P
RINT
M
ATERIALS
4.9
4
• Load only one size of print material at a time in the
Multi-Purpose Tray.
• To prevent paper jams, do not add paper when there is still
paper in the Multi-Purpose Tray. This also applies to other
types of print materials.
• Print materials should be loaded face up with the top edge
going into the Multi-Purpose Tray first and be placed on the
centre of the tray.
• Do not place objects on the Multi-Purpose Tray. Also avoid
pressing down or applying excessive force on it. The tray may
fall apart from the printer.
To load paper in the Multi-Purpose Tray:
1
Pull the Multi-Purpose Tray down towards you.
2
Slide the extender to extend the tray to its full-length
position to hold longer paper.
To Next Page
Loading...
