Service Manual
Alignment & Troubleshooting
4-16
Samsung Electronics
In the optional tray 2
1. Pull the optional tray 2 open.
2. Remove the jammed paper from the printer.
If the paper does not move when you pull, or if you
do not see the paper in this area, stop and go to
step 3.
3. Pull the tray 1 half.
4. Pull the paper straight up and out.
5. Insert the trays back into the printer. Printing
automatically resumes.
In the manual tray
1. Remove the jammed paper from the printer.
2. Open and close the front cover.
3. Load a paper into the manual feeder, then the
printer resumes.
To Next Page
Loading...
