Media and tray
36
2. Menu overview and basic setup
1
Open the multi-purpose tray and unfold the multi-purpose
tray extension, as shown.
2
Adjust the multi-purpose tray paper width guides to the width
of the paper.
3
Flex or fan the edge of the paper stack to separate the pages
before loading paper.
4
Load the paper. Squeeze the multi-purpose tray paper width
guides and adjust them to the width of the paper.
5
Set the paper type and size from the control panel (see
"Setting the paper size and type" on page 16).
1
2
To Next Page
Loading...
