EasyManua.ls Logo

Samsung ML-331 Series User Manual

Samsung ML-331 Series
148 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Regulatory information
96
5. Appendix
17
Turkey only
18
Replacing the fitted plug (for UK only)
Important
The mains lead for this machine is fitted with a standard (BS 1363) 13
amp plug and has a 13 amp fuse. When you change or examine the
fuse, you must re-fit the correct 13 amp fuse. You then need to
replace the fuse cover. If you have lost the fuse cover, do not use the
plug until you have another fuse cover.
Contact the people from you purchased the machine.
The 13 amp plug is the most widely used type in the UK and should
be suitable. However, some buildings (mainly old ones) do not have
normal 13 amp plug sockets. You need to buy a suitable plug
adaptor. Do not remove the moulded plug.
If you cut off the moulded plug, get rid of it straight away.
You cannot rewire the plug and you may receive an electric
shock if you plug it into a socket.
Important warning:
If the wires in the mains lead do not match the colors marked in your
plug, do the following:
You must connect the green and yellow wire to the pin marked by
the letter “E” or by the safety ‘Earth symbol’ or colored green and
yellow or green.
You must connect the blue wire to the pin which is marked with the
letter “N” or colored black.
You must connect the brown wire to the pin which is marked with
the letter “L” or colored red.
You must earth this machine.
The wires in the mains lead have the following color code:
Green and Yellow: Earth
Blue: Neutral
Brown: Live
Question and Answer IconNeed help?

Do you have a question about the Samsung ML-331 Series and is the answer not in the manual?

Samsung ML-331 Series Specifications

General IconGeneral
BrandSamsung
ModelML-331 Series
CategoryPrinter
LanguageEnglish

Summary

1. Software Installation

Installation for Macintosh

Step-by-step guide for installing machine software on Macintosh operating systems.

Installation for Linux

Step-by-step guide for installing machine software on Linux operating systems.

2. Using a Network-Connected Machine

Wired network setup

Detailed instructions for establishing a wired network connection for the machine.

Installing driver over the network

Steps to install printer drivers remotely across a network for various operating systems.

Wireless network setup

Guide to configuring and connecting the machine wirelessly using WPS or manual settings.

4. Special Features

5. Maintenance

6. Troubleshooting

Paper feeding problems

Troubleshooting steps for issues related to paper jams, feeding errors, and misfeeds.

Power and cable connecting problems

Solutions for issues concerning power supply, cable connections, and overall connectivity.

Printing problems

Addressing general issues that prevent the machine from printing correctly.

Related product manuals