12
2. Using a network-connected machine
Useful network programs
There are several programs available to setup the network settings
easily in a network environment. For the network administrator
especially, managing several machines on the network is possible.
Before using the programs below, set the IP address first.
1
SyncThru™ Web Service
The web server embedded on your network machine allows you to
do the following tasks (see "Using SyncThru™ Web Service" on page
26):
• Check the supplies information and status.
• Customize machine settings.
• Set the email notification option. When you set this option, the
machine status (toner cartridge shortage or machine error) will
be sent to a certain person's email automatically.
• Configure the network parameters necessary for the machine to
connect to various network environments.
2
SyncThru™ Web Admin Service
Web-based machine management solution for network
administrators. SyncThru™ Web Admin Service provides you with an
efficient way of managing network devices and lets you remotely
monitor and troubleshoot network machines from any site with
corporate internet access. Download this program from http://
solution.samsungprinter.com.
3
SetIP
This utility program allows you to select a network interface and
manually configure the IP addresses for use with the TCP/IP protocol.
• See "IPv4 configuration using SetIP (Windows)" on page 13.
• See "IPv4 configuration using SetIP (Macintosh)" on page 14.
• See "IPv4 configuation using SetIP (Linux)" on page 15.
TCP/IPv6 is not supported by this program.
To Next Page
Loading...
Need help?
General