1. Software installation
This chapter provides instructions for installing essential and helpful software
for use in an environment where the machine is connected via a cable. A locally
connected machine is a machine directly attached to your computer using the
cable. If your machine is attached to a network, skip the following steps below
and go on to installing a network connected machine’s driver (see Installing
driver over the network17).
• Installation for Macintosh 5
• Reinstallation for Macintosh 7
• Installation for Linux 8
• Reinstallation for Linux 10
• If you are a Windows OS user, refer to the Basic Guide for installing the
machine’s driver.
• Only use a USB cable no longer then 3 meter (118 inches).
To Next Page
Loading...
Need help?
General