Samsung MM-C330D - Connecting External Components; Connecting the FM Antennas

ENG
13
Connecting the FM Antennas
14
Connect AUX IN on the player to Audio Out on the external analog component.
•
Be sure to match connector colors.
1
Example: Analog signal components such as a VCR, Camcorder, and TV.
Connecting an External Analog Component
Connecting External Components
Press AUX to select AUX.
•
‘
AUX’ appears in the display.
2
CONNECTIONS
1
Connect the FM antenna supplied to the FM COAXIAL Jack.
2
Slowly move the antenna wire around until you find a location where reception is good, then fasten it
to a wall or other rigid surface.
• This unit does not receive AM broadcasts.
Note
8
Audio Cable
If the external analog component has
only one Audio Out, connect either left
or right.
(not supplied)
8
FM Antenna (supplied)
MM-C330D-Latin-xsp-ENG-1.indd 16-17MM-C330D-Latin-xsp-ENG-1.indd 16-17 2010-3-4 8:38:382010-3-4 8:38:38