15
Setting the Clock
For each step, you have a few seconds to set the required options.
If you exceed this time, you must start again.
•
"CLOCK" is displayed.
2
Press TIMER/CLOCK
twice.
1
Switch the system on
by pressing POWER
button.
•
"TIMER" appears in the display.
•
The current time is now set.
5
When the correct
time is displayed,
press ENTER.
•
Increase the minutes :
•
Decrease the minutes :
4
When the correct
hour is displayed,
press ENTER.
The minutes flash.
•
Increase the hours :
•
Decrease the hours :
3
Press ENTER.
The hour flashes.
•
You can display the time, even when you are using another function, by pressing
TIMER/CLOCK once.
Note
•
You can also use on the panel front instead of buttons in step 3,4.
MM-DG25-Asia-ENG-1.indd 18MM-DG25-Asia-ENG-1.indd 18 2009-4-1 11:15:242009-4-1 11:15:24
Downloaded From Disc-Player.com Samsung Manuals
To Next Page
Loading...
