ENG
21
You can connect a set of headphones to your micro-compact
system so that you can listen to music or radio programmers
without disturbing other people in the room. The headphones
must have a 3.5
ø jack or an appropriate adapter.
Connect the headphones to the PHONES jack on the main unit.
Result: The loudspeakers are no longer used to output the sound.
Prolonged use of headphones at a high volume may damage your
hearing.
Connecting Headphones
While listening to music, you can set the system to switch
off automatically.
Example: You wish to go to sleep to music.
Press SLEEP.
Result: playback starts and the following indications are displayed:
Press SLEEP once or more times to indicate how long the
system should continue playing before it switches off:
At any time, you can:
Check the remaining time by pressing SLEEP
Change the remaining time by repeating Steps 1 and 2
To cancel SLEEP function, press SLEEP once or more times
until SLEEPOFF is display.
Setting the System to Switch off
Automatically
1
2
3
90 MIN
To Next Page
Loading...
