3
Samsung Portable SSD T3 User manual
Using T3
Using T3 on a PC
1. Connecting to a PC
Connect T3 to a desktop PC or laptop using a USB port.
2. Setting password, logging in and changing settings on a PC
A. Running the software
In the Explorer (Windows OS) or Desktop (Mac OS), select the T3 Security Enabler icon.
T3 Security Enabler for Windows.exe T3 Security Enabler for Mac.app
* If you format the T3 after purchase, the software stored on the drive will be deleted. In such case, you can
download the T3 Security Enabler software from Samsung website
http://www.samsung.com/samsungssd
to set a password.
B. Setting password
Set a password by following the instructions on each screen of the software. Once you agree to the
terms and conditions of the software, you can set a password through the following steps.
(Certain software components will be installed on the user’s PC for executing the password functions
and user convenience.)
Password setup screen
Initial screen Set a password for Samsung Portable SSD
Summary screen Rename the drive (optional)
* For Mac OS, SAT drivers for executing security functions and kernel software for automatically displaying
the log in window when T3 is connected to the PC are installed. If the driver is not installed, complete the
installation by referring to SAT driver installation instructions. Once installed, disconnect and reconnect
T3 to ensure that the installation was successful.
To Next Page
Loading...
