Sending a fax
180
8. Faxing (Optional)
10
Sending a fax manually using On Hook
This method is sending a fax using On Hook in the Basic tab.
When you use Delay Send, Quick Start Fax and Priority Send in the
Advanced tab, you cannot send a fax using On Hook.
1
Place the originals face up in the RADF or place a single original face
down on the scanner glass and close the RADF (see "Loading originals"
on page 72).
2
Press Fax from the display screen.
3
Adjust the document settings in the Advanced or Image tab (see
"Adjusting the document settings" on page 187).
4
Press the Basic tab.
5
Select Resolution.
6
Press On Hook on the display screen.
7
When you hear the dial tone, enter a fax number using the numeric
keypad on the control panel.
8
Press (Start) when you hear a high-pitched fax signal from the
remote fax machine.
To Next Page
Loading...
