Receiving a fax
185
8. Faxing (Optional)
1
Press Machine Setup > Application Settings > Fax Settings > Secure
Receive from the display screen.
The Secure Receive mode can only be configured by an authorized user
who has registered an ID and a password on the machine. When the
machine requests, enter the ID and password.
2
Press a fax line if your machine has multiple fax lines.
3
Press On to active this feature.
When the machine receives a fax in this mode, Print will be activated. If you
want to print the secured faxes, press Print. All secured faxes will be printed
out.
4
If you want to Passcode setting, press Passcode blink then input the
Passcode.
5
If you want incoming faxes to go into memory always, press Whole Day.
Otherwise, go to the next step.
6
Set Start Time by pressing the + and - buttons. Press OK.
7
Press End Time, and set the specific end time using the + and - buttons.
8
Press OK from the display screen.
To deactivate the Secure Receive feature, press Off. In this case, the
received fax will be printed out.
To Next Page
Loading...
