Samsung Multifunction MultiXpress SL-K3250NR - Page 367

Understanding display messages
367
15. Troubleshooting
[color] Imaging Unit
Failure: [error number].
Install [color] imaging
unit again
The imaging unit is not
installed.
Install the imaging unit.
If it is already installed,
try to reinstall the
imaging unit. If the
problem persists, call
for service.
End of life. Replace with
new [color] imaging unit
The indicated imaging unit
has almost reached its
estimated cartridge life
a
.
Replace the imaging
unit with a Samsung-
genuine imaging unit
(see "Replacing the
imaging unit" on page
300).
Engine System
Failure[error number]:
Turn off then on
There is a problem in the
engine system.
Unplug the power cord
and plug it back in. If
the problem persists,
call for service.
Fan Failure: [error
number]. Open the door,
then close it. Call for
service if the problem
persists
There is a problem in the
fan.
Open the door, then
close it. If the problem
persists, call for service.
Fan Failure: [error
number]. Turn off then
on. Call for service if the
problem persists
There is a problem in the
fan.
Unplug the power cord
and plug it back in. If
the problem persists,
call for service.
Message Meaning Suggested solutions
• Finisher Failure: [error
number]. Open the
finisher door, then
close it. Turn off then
on if the problem
persists
• Finisher Failure: [error
number]. Check
finisher
There is a problem in the
finisher system.
Open the door, then
close it. If the problem
persists, call for service.
Finisher is pulled out.
Insert it properly
The finisher is not
securely connected.
Reinstall the finisher. If
the problem persists,
call for service.
Finisher jam door is open.
Close it
The finisher door is not
securely latched.
Close the door until it
locks into place.
Finisher stapler door is
open. Close it
The finisher stapler door
is not securely latched.
Close the door until it
locks into place.
• Front door is open.
Close it
• Right door is open.
Close it
The front door or right
door is not securely
latched.
Close the door until it
locks into place.
Fuser unit is not
compatible. Check user’s
guide.
The fuser unit you have
installed is not for your
machine.
Install a Samsung-
genuine fuser unit,
designed for your
machine, call for
service.
Message Meaning Suggested solutions