Lab Test Report
Samsung MultiXpress C9250ND
23
BuyersLab.com
©2010 Buyers Laboratory Inc. Reproduced by permission of Buyers Laboratory Inc. Any duplication of this report without the written permission
of Buyers Laboratory, is unlawful and violators will be prosecuted. To purchase reprints, contact
BLI at BLIEurope@buyerslab
.com.
Colour Shift
Test Point
E
BLI Rating
25,000 3.64 Very Good
50,000 4.68 Good
73,000 3.65 Very Good
100,000 4.61 Good
Delta E is a colorimetric measurement assessing the distance between colours. The readings above reflect the average shift of the
colour gamut from the previous measured point.
The colour gamut displayed a noticeable volume
increase in the cyan to green, red and magenta regions
after the start of testing, though the gamut remained
relatively consistent at all test points after the start.
Colour Density Readings
Colour Yellow Magenta Cyan
Print Density
0.88 1.02 1.02
Density of a printed image with blocks of all solid colours (based on the average of two readings for each colour).
Black print density:
1.41 to 1.49
Density for units in this class tested to date:
0.98 to 1.78
Measurements are based on four readings corresponding to four different solid black
locations on the output. The higher the density reading, the darker the image.
Halftone range:
Halftone output was visible from the 2% to 100% dot-
fill levels, with distinct transitions between all levels.
0 1.00.5
C9250ND
Print Density
21.5
Range for
tested units
BuyersLab.com
To Next Page
Loading...
