11
Operation
Turning on the Power and Selecting a Weight
The first time you plug the power cord into an outlet, or after there has
been an interruption in power, the display shows “ ” At this point,
you can select weight system for the display. You can choose between
pounds (LBS) or kilograms (KG). To do so,
1 Press “0” immediately after plugging in your microwave. The
display will show: If the display does not shows “Kg”, you will
need to unplug the microwave and then plug it in again in order to
change to the weight system.
2 Press “0” repeatedly to select the weight system you wish to use:
When you have selected the weight system you want to use, press
the PAUSE/CANCEL button to end this procedure, or press
CLOCK to set the clock
Setting the Clock
1 Press the Clock button. The display will show:
2 Use the number buttons to enter the current time. You must
press at least three numbers to set the clock. If the current time is
5:00 enter, 5,0,0.
3 Press Clock again. A colon will blink, indicating that the time is
set.
If there is a power interruption, you will need to reset the clock.
You can check the current time while cooking is in progress by
pressing the Clock button.
Using the Pause/Cancel Button
The Pause/Cancel button allows you to clear instructions you have
entered. It also allows you to pause the oven’s cooking cycle, so that
you can check the food.
• Pause the oven during cooking: press Pause/Cancel once. To
restart, press Start.
• Stop cooking, erase instructions, and return the oven display to the
time of day: press Pause/Cancel twice.
• Correct a mistake you have just entered: press Pause/Cancel once,
then re-enter the instructions.
kg g oz
Lbs
cup
.
On Lock Demo
kg g oz lbs cup
III
On Lock Demo
kg g oz lbs cup
III
XGt~XW]W~ht~XY]W~hUGGwGXXGGzSGqGY^SGYWWXGG\aY]Gwt
To Next Page
Loading...
