Samsung MW5490W User Manual (English)

Questions and Answers:

M
Michele ButlerAug 19, 2025
What to do if Samsung Microwave Oven timer starts but no heat?
- R
  Richard BartonAug 19, 2025
  If your Samsung Microwave Oven timer starts counting down, but there's no microwave oscillation (no heat, but the oven lamp and fan motor turn on), it could be due to several reasons: * Misalignment of latch switches. * Open or loose connection of the high voltage circuit, especially the magnetron filament circuit. * Defective high voltage components such as the H.V.Transformer, H.V.Capacitor, H.V.Diode, or Magnetron. * Open or loose wiring of the power relay. * Defective primary latch switch. * Defective power relay or Ass'y PCB. Adjust the door and latch switches. Check the high voltage components according to the component test procedure and replace them if defective. You may also need to replace the PCB main.
M
Michelle BergAug 22, 2025
Why Samsung Microwave Oven does not accept key input?
- H
  harrybrownAug 22, 2025
  If your Samsung Microwave Oven does not accept key input (program), it could be due to: * Key input is not in sequence. * Open or loose connection of the membrane key pad to Ass'y PCB. * Shorted or open membrane panel. * Defective Ass'y PCB. Refer to the operation procedure. Replace the PCB main.
N
Nathan AguilarAug 25, 2025
Why does Samsung MW5490W take longer to cook?
- A
  Alejandro OrtizAug 25, 2025
  If your Samsung Microwave Oven has low microwave output, causing it to take longer to cook food, it could be due to: 1. A decrease in power source voltage. 2. An open or loose wiring of the magnetron filament circuit (intermittent oscillation). 3. Aging of the magnetron. Consult an electrician to check the power source voltage.
C
christopherandersonAug 27, 2025
Why does Samsung MW5490W Microwave Oven stop in the middle of cooking?
- M
  Mike GomezAug 27, 2025
  If your Samsung Microwave Oven stops operating during cooking, it could be due to: * Open or loose wiring of the primary interlock switch. * Operation of thermal cutout (Magnetron). Adjust the door and latch switches.
I
iweberAug 28, 2025
Why Samsung MW5490W Microwave Oven can program but timer doesn't start?
- M
  moorevanessaAug 28, 2025
  If your Samsung Microwave Oven can be programmed, but the timer does not start, it could be due to: * Open or loose wiring of the secondary interlock switch * Off-alignment of the primary interlock * Defective secondary interlock S/W Adjust the door and interlock switches.
R
rhuntAug 30, 2025
Why is my Samsung MW5490W completely dead?
- S
  sduncanAug 30, 2025
  If your Samsung Microwave Oven is completely dead with no display or operation, even with a good fuse, it could be due to: * Open or loose lead wire harness * Open thermal cutout (Magnetron) * Open low voltage transformer * Defective Ass'y PCB Check the fan motor when the thermal cutout is defective. Check Ass'y PCB when LVT is defective.
J
Jenna MorrowSep 1, 2025
Why is the turntable motor not rotating in my Samsung MW5490W Microwave Oven?
- J
  Jeff DeckerSep 1, 2025
  If the turntable motor in your Samsung Microwave Oven does not rotate, it could be due to: * Open or loose wiring of the turntable motor. * Defective turntable motor. Check the wire of the turntable motor and replace the turntable motor if necessary.
R
Ryan LevineSep 3, 2025
Why is my Samsung MW5490W sparking?
- S
  Stephanie MacdonaldSep 3, 2025
  If your Samsung Microwave Oven is sparking, it's likely due to metallic ware or cooking dishes touching the oven wall, or ceramic ware trimmed with gold or silver powder. Avoid using any type of cookware with metallic trimming.
Q
qsmithSep 5, 2025
How to fix uneven cooking in Samsung MW5490W?
- M
  Melissa CastroSep 5, 2025
  If your Samsung Microwave Oven cooks food unevenly, it's due to the uneven intensity of the microwaves. Wrap thinner parts of the food with aluminum foil. Use plastic wrap or cover with a lid. Stir once or twice while cooking foods such as soup, cocoa, or milk.
W
William MaySep 7, 2025
What to do if Samsung MW5490W has no display and the fuse is blown?
- A
  amynewmanSep 8, 2025
  If your Samsung Microwave Oven has no display and no operation at all, and the fuse is blown, it could be due to: * Shorted lead wire harness * Defective primary latch switch * Defective monitor switch * Shorted HVCapacitor * Shorted HVTransformer Check the adjustment of the primary, interlock monitor, power relay, and door sensing switch.