Samsung MX-F870 - Rear Panel Description; Speaker and Input Connections

6 English English 6
English 7
Rear Panel
1. Cooling fan
• Thefanalwaysturnswhenthepowerison.
Secureaminimum10cmofclearspacefromall
sidesofthefanwheninstallingtheproduct.
2. 4.2 CH Speaker Connector Terminals
The speaker connector terminals are located on the
rear of the system.
1.
To achieve the correct sound quality, insert the
speaker connector cables identified below into the
correct speaker terminals on the back of the sys-
tem.
• Leftspeaker(markedL).
• Rightspeaker(markedR).
3. ONLY FOR SERVICE
• Thisjackisforserviceonly.Pleasedonotuse.

4. AUX IN 2 Terminals
1.
Use the Audio Cable (not supplied) to connect AUX IN
2 on the product to Audio Out on an external analog
component.
• Besuretomatchconnectorcolors.
• Iftheexternalanalogcomponenthasonlyone
AudioOutjack,connecttoeithertheleftorright
terminal.
• PresstheTUNER/AUXbuttontoselecttheAUX
2input.
• WhentheunitisinAUXmode,ifnoneofthe
buttonsonthefrontpanelarepushedformore
than8hours,thepowerwillautomaticallyturnoff.
5. FM/AM Antenna Connector Terminal
Plug the connector on the FM/AM antenna (supplied)
into the FM/AM terminal on the rear of the system.
6. LED Terminals of the Front Speakers
Connect the LED cables of the Front Speakers to each
LED Terminals of the system. You can enjoy the special
light effect on your speakers.
7. Voltage Selector (Optional)
Check the position of the voltage selector on the
rear of the system(optional).
This product may not support the Voltage Selector
function depending on your region.
1
2
3
4
5
6
7
MX-F870-ZP-ENG-0304.indd 7 2013-3-13 16:10:57