Need help?Do you have a question about the Samsung NK30N7000US and is the answer not in the manual?
General| Color | stainless steel |
|---|---|
| Hood Type | under cabinet |
| Venting Type | ducted, external, recirculating |
| Number of Fan Speeds | 4 |
| CFM | 390 cubic feet per minute |
| Control Type | touch pad |
| Delay Start | no |
| Interior Light | yes |
| Remote Control | no |
| Voltage | 120 volts |
| Current | 15 amperes |
Weight and Dimensions| Depth | 19 4/5 inches |
|---|---|
| Height | 9 3/4 inches |
| Width | 30 inches |
| Net Weight | 34.2 pounds |
Explains warning symbols and provides general safety precautions for safe operation.
Details FCC and IC compliance, including radiation exposure statements and operational conditions.
Specifies voltage, frequency, and circuit requirements for safe electrical installation.
Outlines rules for vent termination, duct materials, and system limitations for optimal performance.
Describes how to connect the hood for top or rear venting using specific duct sizes.
Provides recommended minimum and maximum installation heights above the cooking surface.
Lists necessary tools and components, including supplied hardware and parts.
Details the product's dimensions and critical clearances required for installation.
Steps to prepare the installation site, including power disconnection and site selection.
Instructions for drilling holes for electrical wiring, specifying placement and diameter.
Guides for cutting rectangular or circular openings in walls or cabinets for vent connections.
Instructions for installing the vent system and sealing exterior openings for airtightness.
Steps for physically attaching the range hood to the cabinet or wall structure.
Details on configuring the blower motor and connecting the vent system for rear venting.
Procedure for connecting the power supply, including wiring and terminal box setup.
Final checks for fan and light operation, and troubleshooting basic power issues.
Overview of the hood's function for smoke and odor removal, and control location.
Identifies and explains the function of each control button on the hood interface.
Instructions on setting and using the timer for automatic hood shut-off.
Details on pairing the hood with compatible cooktops for automatic fan control.
Steps for establishing and resetting Bluetooth connections between the hood and cooktop.
Explains automatic fan activation based on cooktop usage and app control.
Guide on converting blower performance between normal and power modes.
Procedures for cleaning exterior surfaces and stainless steel baffle filters.
Information stating that LED lamps replacement requires a service technician.
Details the one-year parts and labor warranty, exclusions, and limitations for US customers.
Outlines the one-year parts and labor warranty, exclusions, and limitations for Canadian customers.
To Next Page