Samsung NP-N100 - Changing the Boot Priority

60
61
Chapter 3
Settings and Upgrade
Changing the Boot Priority
This computer is congured to boot from an external-type ODD
rst. As an example, the procedures to change the highest boot
priority device to the hard disk drive are described below.
The screen images in this document may dier from actual
product.
1
Select the Boot menu in the BIOS Setup.
2
Press <Enter> on the Boot Device Priority item.
XXXXXXXX
3
Press the down key (
↓
) to move to the AHCI HDD item and
press the F6 key to move up to the top item.
Boot Device Priority
[Boot priority order]
1. AHCI CD : N/A
2. AHCI HDD : XXXXXXXX
3. USB KEY : N/A
4. USB CD : XXXXXXXX
5. USB FDD : N/A
6. USB HDD : N/A
7. PCI BEV : N/A
8.
- IDE HDD : N/A
- IDE CD : N/A
- PCI SCSI : N/A
- USB ZIP : N/A
- USB LS120 : N/A
[Excluded from boot order]
4
Press the F10 key to save the settings and exit Setup.
The highest boot priority device is now set to the Hard Drive.