63
Chapter 3
Settings and Upgrade
Upgrading Memory
2
Pull the memory module latches outward. The memory
module will pop up.
Remove the memory module out at an angle of 30 degrees.
3
Insert a new memory module into the memory slot at an
angle of approximately 30 degrees aligning it to the angle of
the memory slot.
Memory Slot
4
Push the memory module down so that it is completely xed.
If the memory does not t easily, push the memory module
down while pulling the memory module latches outward.
5
Close the memory compartment cover and fasten the screw.
To Next Page
Loading...
