110 Users Manual
Upgrading Memory
The onboard memory is installed on the motherboard of this computer and one memory
slot is provided for installing additional memory.
Adding a memory module
Before removing or replacing the memory module, turn the system off
completely and remove the battery and AC adapter. Do not replace the
memory module when the system is in Standby or Hibernation mode.
1. Using a screwdriver, open the memory module compartment cover on the bottom
of the computer.
2. Align the new memory module connectors accordingly and slide it into the slot at
a 30
° angle.
Ensure the notch on the memory module corresponds with the notch on the
socket.
screw
To Next Page
Loading...
