120 Users Manual
Q6 The Taskbar on the bottom of the screen does not appear when a projector
is used as the display device.
A A This may happen, even though WXGA LCD supports the 1280 x 800 mode,
the projector does not support that mode. In this case change the resolution to
1024x768 (recommended) on your computer.
Q7 Switching the MS-DOS command prompt to full screen mode or Windows
mode by pressing the <Alt>+<Enter> keys does not operate properly.
A Pressing the <Alt>+<Enter> keys using an USB keyboard, may cause the key
input to be recognized as multiple key inputs depending on the keyboard input
recognition time. In this case, the MS-DOS command prompt is repeatedly
switched to full screen and then to Windows several times. Please press the
<Alt>+<Enter> keys more quickly, or press the <Alt>+<Enter> keys using the
system keyboard.
Q8 Pressing the shortcut key on the keyboard does not show the Samsung
Display Manager icon.
A The Samsung Display Manager icon only appears when both the Magic
Keyboard and the Samsung Display Manager program are installed.
Q9 I cannot set up Dual View properly.
A This may happen when Clone mode is selected for an external monitor.
Press the <Fn>+<F4> key combination to select LCD and try to set up Dual
View again.
Q10 The screen is rotated, but I cannot return it to the original orientation.
A This may happen when you have used the screen pivot function or pressed a
wrong key while using the computer. For Intel Graphics, press the
Ctrl+Alt+Direction Key ( ▲ : rotate 0 degrees, ▶ : rotate 270 degrees, ▼ : rotate
180 degrees, ◀ : rotate 90 degrees)to return to the original orientation.
Q11 The color is strange when the picture is displayed on the connected monitor
(or projector).
A Check the monitor signal cable connection and reconnect the cable.
To Next Page
Loading...
