11-17
11. References
2.
Push the memory module tabs outward to pop the memory module upwards.
Carefully pull the module out at an angle of about 30
˚.
11. References
Adding a memory module
1.
Align the new memory module connectors accordingly and slide it into the slot with a 30
˚
angle.
Ensure the notch on the memory module corresponds with the notch on the socket.
2.
Push the memory module in until the module clicks into place. If the memory
module is not fixed completely, gently push the memory down while pressing the
memory module tabs outward.
- This Document can not be used without Samsung's authorization -
To Next Page
Loading...
