Samsung NP-R20 series - Main System Disassembly

4-1
4. Disassembly and Reassembly
4-1. Disassembly and Reassembly of R20
- This document cannot be used without Samsung's authorization -
Part
Figure Description
Main
System
1. Make sure to separate the AC
adapter and battery before
disassembling the system.
2. Slide the knob all the way to the end
in the direction of the arrows (1) and
push the battery in the direction of the
arrows (2).
3.Ifyoupushthebatteryupwards,thebattery
is separated.
4. Remove the screws from the bottom.
5. Remove the HDD compartment cover.
6. Remove the memory compartment cover.