85
Chapter 3.
Settings and Upgrade
Upgrading Memory
(For 11.6 inch models)
A memory is installed in the memory slot at the bottom of this
computer. The procedures to replace the memory are described
below.
Replace new memory only after shutting the computer •
down completely. Do not replace memory when the
computer is in Sleep mode. Disconnect main power plug
and remove the battery before continuing.
The images used for the illustration are of a representative •
model, therefore the images may di er from the the actual
product.
Replacing the Memory
1
Remove the screw on the memory compartment cover at the
bottom of the computer using a screw driver.
Fixing Screw
To Next Page
Loading...
