Basics
28
Wake on LAN (WOL) feature
Activate the system remotely from sleep mode when a signal,
such as a magic packet command, is received via a wired LAN.
1
Select the Start button ( )
→
→
Network & Internet
→
Ethernet
→
Change adapter options
.
6
Configure the IP settings.
•
When using DHCP, select
Obtain an IP address
automatically
.
•
When not using DHCP, contact the network administrator
for the IP address. To use a static IP address, select
Use the
following IP address
and set the IP address manually.
7
Select
OK
to save the settings.
To Next Page
Loading...
