Samsung NP900X3B Series 9 Notebook - Page 65

64
Chapter 2.
Using the computer
Using the TPM Security Device
(Optional)
5
If the system automatically restarts, the PHYSICAL
PRESENCE SCREEN appears. Con rm that Yes is selected
and press Enter.
PHYSICAL PRESENCE SCREEN
[Y e s] [No]
TPM State has requested to change to
Clear
Do you want to accept it?
6
When the computer restarts automatically and the Samsung
logo screen appears, press the F2 key repeatedly.
7
Select the Security > TPM Con guration > Change TPM
Status item and set the item to Enable and Activate.
Phoenix SecureCore Tiano Setup
TPM Conguration
TPM Support
Change TPM Status
Current TPM State
Security
[Enabled]
[No Change]
Disabled and Deactivated
No Change
Clear
Enable and Activate
Disable and Deactivate
Clear
Enable and
Ac
tivate
D
isable and Deac
tivate
8
Press the F10 key to save the changes. The computer
automatically restarts. Initialization of the TPM chip has been
completed.
Now, install the TPM program and register the TPM program.