Need help?Do you have a question about the Samsung NS071SDXEA and is the answer not in the manual?
General| Brand | Samsung |
|---|---|
| Model | NS071SDXEA |
| Category | Air Conditioner |
| Language | English |
General safety instructions and important information for safe operation.
General restrictions and considerations for indoor unit installation.
Lists and illustrates the accessories supplied with the indoor unit.
Lists and illustrates accessories for the wired remote control.
Guidelines for selecting the optimal location for the indoor unit.
Specifies required clearances for installation and service access.
Provides guidance on insulation thickness for different unit models.
Technical drawings and dimensions for the NS035LDXEA indoor unit.
Technical drawings and dimensions for NS052LDXEA/NS071LDXEA units.
Technical drawings and dimensions for the NS052SDXEA indoor unit.
Technical drawings and dimensions for SSXE series units.
Technical drawings and specifications for the NS090SDXEA indoor unit.
Technical drawings and specifications for SDXEA series units.
Step-by-step guide on installing suspension bolts and hanging the indoor unit.
Instructions for ensuring proper condensate drainage and unit leveling.
Procedure for purging inert gas from refrigerant pipes before connection.
Steps for connecting and tightening refrigerant pipes using torque specifications.
Guidance on pipe insulation and permitted connection methods.
Instructions on how to cut, ream, and flare refrigerant pipes correctly.
Checking flaring quality and torque values for pipe connections.
Procedures for leak testing the refrigerant system using nitrogen and R-410A.
Guidelines for insulating refrigerant pipes to prevent condensation.
Steps for connecting the drain hose to the indoor unit and ensuring proper drainage.
Instructions for wrapping the drain hose with insulation.
Details on connecting drainpipes without a drain pump.
Details on connecting drainpipes with a drain pump.
Schematic for connecting the indoor and outdoor units' power and communication cables.
Details on cable types, specifications, and terminal block connections.
Table for setting indoor unit fan speed based on external static pressure.
Option codes for adjusting fan speed based on factory settings.
Instructions for setting the indoor unit option code via wired remote.
Procedure for setting the main/group address for the indoor unit.
Instructions for setting DIP option codes for indoor unit installation.
Detailed table explaining various option codes and their settings.
Guide to understanding abnormal conditions indicated by LED displays.
Guide to understanding further abnormal conditions indicated by LED displays.
List of error codes displayed on the wired remote and their meanings.
To Next Page
