EasyManua.ls Logo

Samsung NV11 - Sound Volume; Operation Sound; Start up Sound; Shutter Sound

Samsung NV11
90 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ŝ63Ş
Setup menu
[ Start up sound ]
ƈ You can select the sound that is activated whenever the camera is turned on.
[ Sound Volume ]
ƈ You can select the sound volume levels of start sound, operation sound and
shutter sound.
ƃ [Sound Volume] sub menus : [Off], [Low],
[Medium], [High]
Off
Low
Medium
High
Start Image
Sound Volume
BEEP Sound
Start Sound
Shutter Sound
Ȝ
Off
Sound 1
Sound 2
Sound 3
Start Image
Sound Volume
BEEP Sound
Start Sound
Shutter Sound
Ȝ
ƃ Start up sound : [Off], [Sound 1], [Sound 2],
[Sound 3]
Off
Sound 1
Sound 2
Sound 3
Start Image
Sound Volume
BEEP Sound
Start Sound
Shutter Sound
Ȝ
[ Operation Sound ]
ƈ If you set sound to ON, various sounds will be activated for camera startup,
when buttons are pressed, so that you can be aware of the camera operation
status.
ƃ [Sound] sub menus : [Off], [Sound 1], [Sound 2],
[Sound 3]
- If you set sound to [Off], various sounds will not
be activated.
Exit:BACK
Exit:BACK
Exit:BACK
Off
Sound 1
Sound 2
Sound 3
Start Image
Sound Volume
BEEP Sound
Start Sound
Shutter Sound
Ȝ
[ Shutter sound ]
ƈ You can select the shutter sound.
ƃ Shutter sound : [Off], [Sound 1], [Sound 2],
[Sound 3]
[ Formatting a memory ]
ƈ This is used for formatting the memory. If you run [Format] on the memory, all
images, including the protected images, will be deleted. Be sure to download
important images to your PC before formatting the memory.
ƃ Sub menus
[No] : The memory will not be formatted.
[Yes]: A confirmation window will display. Select the
[Yes] menu by pressing the smart button.
A [Processing!] message appears and the
memory will be formatted. If you run FORMAT
in Play mode, a [No Image!] message will
appear.
Be sure to run [Format] on the following types of memory card.
- A new memory card, or an unformatted memory card
- A memory card that has a file this camera can't recognise or one that has
been taken from another camera.
No
Yes
Format
Delete All
Copy to Card
Video Out
Reset
Ȝ
Exit:BACK
Exit:BACK
ƃ Always format the memory card using this camera. If you insert a memory
card that has been formatted using other cameras, memory card readers, or
PCs, you will get a [Card Error!] message.
INFORMATION

Table of Contents

Related product manuals