Standard phone
1. When you receive a busy signal, hook flash and
dial
[4][4]
.
2. Replace the handset.
3. When the selected line or station becomes free,
the system calls you back.
4. Lift the handset. For an outside line, you will be
connected to a dial tone. Dial the outside
telephone number.
When your system is behind a PBX, you can signal
the PBX system with the flash feature in order to access
a special operation, dial a second party, or transfer
a call while talking on an outside line. It is often
used to place a call on temporary hold and
transfer call to another station on the PBX.
Keyphone
1. While talking on the phone, press
[FLASH]
.
¡¤
You hear a transfer tone.
2. Press the desired station number of the other
system.
3. When the station answers, replace the handset.
CALL PROCESSING
27
Sending a Flash
To Next Page
Loading...
