R-MMC PC
(9 PIN) (9 PIN)
RXD 2 2 RXD
TXD 3 3 TXD
DTR 4 4 DTR
SGND 5 5 SGND
CTS 8
NOTE : If the CTS pin is not connected, the system cannot check the printer
(MODEM) status (power ON/OFF, paper empty, etc.)
FIGURE 7-4 SMDR & REMOTE PROGRAMMING CONNECTIONS
NX-SERIES HYBRID KEY SYSTEM INSTALLATION SECTION
2 - 30
2INSTALL 1999.9.15 12:45 PM 페이지34
To Next Page
Loading...