128
Wireless network
Saving les to a smart phone automatically
The camera connects to a smart phone that supports the AutoShare
feature via a WLAN. When you capture a photo with your camera, the
photo is saved to the smart phone automatically.
•
The AutoShare feature is supported by Galaxy series smart phones or Galaxy
Tab models with the Android 2.3 OS or higher or iOS devices with the iOS 6.0
or higher. Before using this feature, check the device’s rmware and update it
if needed.
•
You should install Samsung SMART CAMERA App on your phone or device
before using this feature. You can download the application from Samsung
Apps, the Google Play Store, or the Apple App Store. Samsung SMART
CAMERA App is compatible with Samsung camera models manufactured in
2013 or later.
•
To install and launch Samsung SMART CAMERA App on an NFC-enabled
smart phone, turn on the NFC feature and place the smart phone near an NFC
tag (p. 30) on the camera. This feature is supported by smart phones running
Android OS 2.3 or higher. This feature is not available for iOS devices.
•
You must insert a memory card to use this feature.
•
If you set this function, the setting is maintained even when you change the
Shooting mode.
•
This feature may not be supported in some modes or may not be available
with some shooting options.
1
On the camera, in Shooting mode, press [m].
2
On the camera, select 1
→
AutoShare
→
On.
•
If the pop-up message that prompts you to download the
application appears, select Next.
3
On the smart phone, turn on Samsung SMART CAMERA App.
•
For iOS devices, turn on the Wi-Fi feature before turning on the
application.
•
To start the application automatically on an NFC-enabled smart
phone, turn on the function and place the smart phone near
the NFC tag (p. 30) on the camera. Verify that the smart phone is
connected to your camera, and then skip to step 6.
4
Select the camera from the list and connect the smart phone
to the camera.
•
The smart phone can connect to only one camera at a time.
5
On the camera, allow the smart phone to connect to your
camera.
•
If the smart phone has been connected to your camera before, it is
connected automatically.
•
An icon that shows the connection status ( ) will appear on the
camera’s screen.
6
On the camera, capture a photo.
•
The captured photo is saved to the camera, and then transferred to
the smart phone.
•
If you recorded a video, it is saved only to the camera.
To Next Page
Loading...
