97
Fan and Temperature
MENU m → System → Fan and Temperature → ENTER E
System
Fan and Temperature
-
The displayed image may differ depending on the model.
Protects the product by detecting the fan speed and internal temperature.
Fan Control
Selects auto or manual for the fan speed settings.
•
Auto / Manual
Fan Speed Setting
Sets the fan speed within a range of 0 and 100.
―
Enabled when Fan Control is set to Manual.
Outdoor Mode
To use the product at a low temperature below 0˚C, make sure to set Outdoor Mode to "On."
This feature keeps the internal temperature of the product steady so that the product can start properly when it is powered on.
―
Do not disconnect the power cable when this feature is set to "On."
―
The product consumes more power when it is turned off if this feature is set to "On" rather than to "Off."
Temperature Control
This function detects the internal temperature of the product. You can specify the temperature range that is acceptable.
The default temperature is set to 77
C.
The recommended operating temperature for this product is 75 to 80 C (based on an ambient temperature of 40 C).
―
The screen will become darker if the current temperature exceeds the specified temperature limit. If the temperature
continues to rise, the product will power off to prevent overheating.
To Next Page
Loading...
