English - 5
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.
✎
Connecting the power cord and antenna.
✎
The PDP device may interfere with an amateur radio or AM radio.
✎
When using two-way radio mobile and portable units or amateur radio or AM radio near by your TV, this may cause the
TV to malfunction.
Setup (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWER
P
button. Setup is available only when the Source is set to TV.
✎
To start the Setup, enter the password using the remote control. The default password is 0-0-0-0.
✎
To return to the previous step, press the Previous button.
1
Menu Language:
Selecting a menu
language
Press the ▲ or ▼ button, then press the ENTER
E
button. Select the
desired OSD (On Screen Display) language.
2
Use Mode: Selecting
the usage mode
Press the ▲ or ▼ button, then press the ENTER
E
button.
y Select the Home Use mode. Store Demo Mode is for retail
environments.
y When pressing TV controller, the function menu screen appears. Select
the MENU(
m
) and press it more than 5 seconds using the controller.
The Store Demo mode is set. Cancel the Store Demo by selecting
Source(s) and pressing it more than 5 seconds.
y Store Demo is only for shop display. If you select it, several functions
are not able to use. Please select Home Use when you watch at home.
3
Network Settings:
Configure network
settings
1. Connect LAN Cable or Samsung Wireless LAN Adaptor, select the Next, then press the
ENTER
E
button.
✎
If you select the Skip, you have to set network in the Network Settings
respectively. For more information, refer to “Setting the Wired Network / Setting
the Wireless Network” in the e-Manual.
2. Complete the network settings in accordance with your desired way.
4
Software Upgrade:
Upgrading the software
to latest version
When checking software version if there is a brand-new version, upgrade the software to
latest version by pressing Upgrade Now.
✎
Press Upgrade Later to upgrade later. For more information, refer to “Software
Upgrade” in the e-Manual.
✎
You can only upgrade software, when the Network Settings is successfully
completed.
ANT OUT
VHF/UHF Antenna
Power Input
or
Cable
Antenna Cable (Not Supplied)
[PD490-ZS]BN68-04070B.indb 5 2012-01-30 �� 2:06:50
To Next Page
Loading...
