Source List / Edit Name
Source List
❑
Use to select TV or other external input sources such as DVD players or Cable Box /
Satellite receivers (Set-Top Box) connected to the TV. Use to select the input source of
your choice.
TV , AV, Component1, Component2, PC, HDMI1, HDMI2/DVI, HDMI3.
You can choose only those external devices that are connected to the TV. In the N
Source List, connected inputs will be highlighted and sorted to the top. Inputs that
are not connected will be sorted to the bottom.
PC
N always stays activated.
Using the Colour buttons on the remote with the Source list
N
Red - (Refresh): Refreshes the connecting external devices.
T - TOOLS (Tools): Displays the Edit Name and Information menus.
Press the
O SOURCE button on the remote control to view an external signal source.
TV mode can be selected by pressing the TV button, number buttons (0~9), and the
P < / > button on the remote control.
Edit Name
❑
VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI PC / DVI / TV / IPTV /
Blu-ray / HD DVD / DMA
You can name the device connected to the input jacks to make your input source selection easier.
When a PC with a resolution of N PS42B450: 640x480@60Hz, PS50B450: 640x480@60Hz, 1280x720@60Hz is connected to the
HDMI IN 2 (DVI) port, you should set the HDMI2/DVI mode to PC in the Edit Name of the Input mode.
When connecting an HDMI/DVI cable to the
N HDMI IN 2 (DVI) port, you should set the HDMI2/DVI mode to DVI or DVI PC in the
Edit Name of the Input mode. In this case, a separate sound connection is required.
Source List
Edit Name
Input
To Next Page
Loading...
