About Anynet+
Connecting Anynet+ Devices
Anynet
+
is a function that enables you to control all connected Samsung devices that support Anynet
+
with your Samsung TV’s remote.
The Anynet
+
system can be used only with Samsung devices that have the Anynet
+
feature. To be sure your Samsung device has this
feature, check if there is an Anynet
+
logo on it.
To connect to a TV
❑
1. Connect the [HDMI 1], [HDMI 2(DVI) or [HDMI 3] jack on the TV and the HDMI OUT jack of the corresponding Anynet
+
device using
an HDMI cable.
To connect to Home Theater
❑
1. Connect the [HDMI 1], [HDMI 2(DVI)], or [HDMI 3] jack on the TV and the HDMI OUT jack of the corresponding Anynet
+
device
using an HDMI cable.
2. Connect the HDMI IN jack of the home theater and the HDMI OUT jack of the corresponding Anynet
+
device using an HDMI cable.
Connect the Optical cable between the Digital Audio Out (Optical) jack on your TV and the Digital Audio Input on the Home Theater.
N
When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound from the Home N
Theater’s Front Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect the Digital Audio Out
(Optical) jack on the DVD player or Cable/Satellite Box (ie Anynet Device 1 or 2) directly to the Ampli er or Home Theater, not the
TV.
Connect only one Home Theater.
N
You can connect an Anynet N
+
device using the HDMI 1.3 cable. Some HDMI cables may not support Anynet
+
functions.
Anynet
N
+
works when the AV device supporting Anynet
+
is in the Standby or On status.
Anynet
N
+
supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.
Anynet
+
Device 1
Anynet
+
Device 2
Anynet
+
Device 3
TV
HDMI 1.3 Cable
HDMI 1.3 Cable
HDMI 1.3 Cable
TV
Anynet
+
Device 1
Anynet
+
Device 2
Anynet
+
Device 3
HDMI 1.3 Cable
HDMI 1.3 Cable
HDMI 1.3 Cable
HDMI 1.3 Cable
Home Theatre
Optical Cable
To Next Page
Loading...
