Samsung PM55H

70
Chapter 5. Menu
System ▼
2nd 3rd Description
Touch Control Lock Prevent touch gestures from controlling your device.
Remote Management You can Allow or Deny external commands to access your device via a network.
• The changed setting remains even after the product is turned off and on using the Panel key or Power switch.
General Smart Security This function protects all the external devices connected to the TV from hackers, spywares, and viruses.
Anynet+ (HDMI-CEC) Refer to Anynet+ (HDMI-CEC) on page 72.
HDMI Hot Plug This feature is used to activate the time delay to turn on a DVI/HDMI source device.
Custom Logo You can download, select, and set the display time of a custom logo that appears when the product turns on.
• Custom Logo
‒ You can select a custom logo (image/video) or turn off the custom logo display.
‒ You must download the custom logo from an external USB device to set the custom logo.
• Logo Display Time
‒ If the type of custom logo is Image, you can set the Logo Display Time.
• Download Logo File
‒ You can download a custom logo into the product from an external USB device.
‒ The le name of the custom logo you want to download must be saved as “samsung” in all small letters.
‒ When there are multiple numbers of external USB connections, the product will attempt to download the
custom logo from the last device that has been connected to the product.
Custom logo le restrictions
• For image type custom logo, only bitmap les (aRGB 32bpp format) are supported.
• The resolution of the image type custom logo must be between a minimum of 64x64 and the maximum screen
resolution. (Horizontal/Vertical values of the resolution must be multiples of 4.)
• For video type custom logo, only TS Stream types are supported.
• The maximum supported video le is 150 MB. The recommended length of a video le is 20 seconds or less.