Setting the Light Effect
You can turn the blue LED on the front of TV on/off.
1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Setup, then press the ENTER button.
Press the ▲ or ▼ button to select
External Settings, then press the ENTER
button.
2 Press the ▲ or ▼ button to select Light Effect, then press the ENTER button.
Press the ▲ or ▼ button to select Off, In Standby, When Watching TV, or
Always, then press the ENTER button.
Press the
EXIT button to exit.
• Off: The LED is always off.
• In Standby: The LED lights while in Standby mode and it turns off when your TV
is turned on.
• When Watching TV: The LED lights when watching TV and it turns off when your
TV is turned off.
• Always: The LED is always lit.
➢
Set the Light Effect to Off to reduce the power consumption.
1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Setup, then press the ENTER button.
2 Press the ▲ or ▼ button to select External Settings, then press the ENTER
button.
3 Press the ENTER button to select Melody.
Press the ▲ or ▼ button to select Off, Low, Medium, or High, then press the
ENTER button.
Adjusting the TV On/Off Melody Sound
The TV power on/off melody sound volume can be adjusted.
• Off: Turns off the melody function.
• Low: Sets the melody volume to low.
• Medium: Sets the melody volume to medium.
• High: Sets the melody volume to high.
Press the EXIT button to exit.
➢
The Melody does not play
- When no sound is output from the TV because the
MUTE button has been
pressed,
- When no sound is output from the TV because you have reduced the
volume to minimum by pressing the VOL
To Next Page
Loading...
