Disassembly & Reassembly
Samsung Electronics 3-5
3-1-11 Separation of ASSY PDP MODULE P-X MAIN BOARD
Part Name Description Description Photo
Flat Cable
① Detach all Connectors from the X Main Board.
※ To separate the Flat Cable of the X-Board, press the
upper and the lower sides of the connector.
: Pinch the sides, but then push down in the ribbon, it
should slide out after that.
X-Main
Board
① Remove 6 screws.
: PH,+,WWP,M3,L8,NI PLT
② Remove the X-Main Board.
To Next Page
Loading...
