Samsung PN42A450 - Page 22

Disassembly & Reassembly
Samsung Electronics 3-7
3-1-13 Separation of ASSY PDP MODULE P-ADDRESS BUFFER BOARD
Part Name Description Description Photo
42"
Still Bar
① Remove 3 screws.
: PH,+,WWP,M3,L8,NI PLT
② Remove the still bar.
▶Before removing the still bar, you should
lift up the panel a little.
50"
Still Bar
① Remove 3 screws.
: PH,+,WWP,M3,L8,NI PLT
② Remove the still bar.
▶Before removing the still bar, you should
lift up the panel a little.
42"
Buffer
Board
① Detach the all connectors from the
buffer board.
② Remove 6 screws.
: PH,+,WWP,M3,L8,NI PLT
③ Remove the E-Board and F-Board.
50"
Buffer
Board
① Detach the all connectors from the
buffer board.
② Remove 7 screws.
: PH,+,WWP,M3,L8,NI PLT
③ Remove the E-Board and F-Board.